Phoenix Contact · LED Light
1319565 is a Phoenix Contact industrial component with Supply voltage 230 V AC (50/60 Hz); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage230 V AC (50/60 Hz)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
230 V AC (50/60 Hz) |
| Power consumption |
13 W |
| Efficiency |
E (1 light source) |
| Mechanical |
| Weight |
1,184.7 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 90 % |
Values follow the Phoenix Contact LED Light specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Where it sits in the control system
The 1319565 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 230 V AC (50/60 Hz) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1319565
Phoenix Contact 1319565 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1319565; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Mounting: DIN rail / panel — Verify it in the project documentation before confirming the order.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
- Power consumption: 13 W — Match it to the existing panel and upstream protection.
- Weight: 1,184.7 g — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1319565
Q.Which value is published under humidity for catalog number 1319565?
For 1319565, humidity is given as 5 % ... 90 %. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1319565, which power consumption entry should be checked?
The power consumption entry quoted above is 13 W. Confirm this figure against the unit currently in the panel.
Q.Where can I find the efficiency data for 1319565?
It is listed in the specification table for Phoenix Contact 1319565 as E (1 light source). Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 1319565?
Send the full catalog number 1319565, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1319565.
Q.How do I confirm compatibility of 1319565 before ordering?
Match the catalog number 1319565 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.