Phoenix Contact · DIN Rail Accessory
1201044 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated torque |
... 1.2 Nm |
| Mechanical |
| Weight |
9.558 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact DIN Rail Accessory specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact DIN Rail Accessory variants |
| Catalog number |
Mounting |
|
1201044 (this page) |
DIN rail / panel |
| 1201882 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1201044 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1201044
Phoenix Contact 1201044 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1201044; record the nameplate data of the unit being replaced before selecting an equivalent.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: DIN rail / panel — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP20 (IEC 60529) — Verify it in the project documentation before confirming the order.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1201044
Q.Where can I find the mounting data for 1201044?
It is listed in the specification table for Phoenix Contact 1201044 as DIN rail / panel. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1201044, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Phoenix Contact 1201044. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under enclosure rating for catalog number 1201044?
For 1201044, enclosure rating is given as IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.Can the 1201044 replace the unit currently installed in my panel?
Compare catalog number 1201044 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1201044 before ordering?
Match the catalog number 1201044 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.