Phoenix Contact 0920452 Connection Cable

SKU: 0920452
Regular price $774.55
In stock (77 units)
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Connection Cable

0920452 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Rated operational voltage 400 V; Enclosure rating IP67 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 4 A
  • Rated operational voltage400 V
  • Enclosure ratingIP67 (IEC 60529)
  • Operating temperature-25...+80 °C (IEC 60068-2-1)

Specifications

Electrical
Rated current Ie up to 4 A
Rated operational voltage 400 V
Mechanical
Weight 9.63 g
Enclosure rating IP67 (IEC 60529)
Environment and compliance
Operating temperature -25...+80 °C (IEC 60068-2-1)
Certifications CE, UL, cULus
Humidity 30 % ... 70 %

Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Connection Cable variants
Catalog number Rated operational voltage Rated current Ie
0920452 (this page) 400 V up to 4 A
0920287 400 V up to 4 A
0920326 400 V up to 4 A
0920384 400 V (In the event of a defective fuse, the downstream circuit is not disconnected.) up to 4 A

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 0920452 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — 400 V — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 0920452

Phoenix Contact 0920452 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 0920452; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.

  • Operating temperature: -25...+80 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
  • Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
  • Rated operational voltage: 400 V — Use it as the reference when cross-checking a current-production equivalent.
  • Humidity: 30 % ... 70 % — Verify it in the project documentation before confirming the order.

Available from stock with datasheet, certificates and a quotation on request.

Common questions about 0920452

Q.Which value is published under operating temperature for catalog number 0920452?

For 0920452, operating temperature is given as -25...+80 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.

Q.Before ordering 0920452, which rated current Ie entry should be checked?

The rated current Ie entry quoted above is up to 4 A. Check the revision of the installed unit if the catalog number has been superseded.

Q.Where can I find the certifications data for 0920452?

It is listed in the specification table for Phoenix Contact 0920452 as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.

Q.How do I confirm compatibility of 0920452 before ordering?

Match the catalog number 0920452 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.

Q.Can the 0920452 replace the unit currently installed in my panel?

Compare catalog number 0920452 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!