Phoenix Contact · Marking System Accessory
0817028 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Mechanical |
| Weight |
359 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
50 % (Storage in a dry and dark place in the original packaging is recommended) |
Values follow the Phoenix Contact Marking System Accessory specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Marking System Accessory variants |
| Catalog number |
Mounting |
|
0817028 (this page) |
DIN rail / panel |
| 0817141 |
DIN rail / panel |
| 0817426 |
DIN rail / panel |
| 0817646 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0817028 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0817028
Phoenix Contact 0817028 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 0817028; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Weight: 359 g — Verify it in the project documentation before confirming the order.
- Mounting: DIN rail / panel — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Enclosure rating: IP20 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 0817028
Q.Before ordering 0817028, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the enclosure rating data for 0817028?
It is listed in the specification table for Phoenix Contact 0817028 as IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.For 0817028, what does the specification table state about mounting?
The specification table lists mounting = DIN rail / panel for Phoenix Contact 0817028. Confirm this figure against the unit currently in the panel.
Q.Can the 0817028 replace the unit currently installed in my panel?
Compare catalog number 0817028 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 0817028?
Send the full catalog number 0817028, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0817028.