Phoenix Contact 0711852 Terminal Block

SKU: 0711852
Regular price $655.93
In stock (87 units)
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Terminal Block

0711852 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Tripping characteristic 40 mm; Rated operational voltage 800 V (IEC 60947-7-1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 41 A (IEC 60947-7-1)
  • Tripping characteristic40 mm
  • Rated operational voltage800 V (IEC 60947-7-1)
  • Mounting35 mm DIN rail (IEC 60715)

Specifications

Electrical
Rated current Ie up to 41 A (IEC 60947-7-1)
Rated operational voltage 800 V (IEC 60947-7-1)
Rated insulation voltage Ui 1000 V
Tripping characteristic 40 mm
Frequency f1= 5 Hz to f2= 250 Hz
Rated torque 25 ... 30 Nm
Rated speed 10 (+/- 2) rpm
Mechanical
Weight 70 mm²/10.4 kg
Mounting 35 mm DIN rail (IEC 60715)
Terminal wire size 70 mm² ... 240 mm²
Environment and compliance
Operating temperature -60 °C ... 110 °C
Certifications CE, UL, cULus
Humidity 20 % ... 90 %

Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Terminal Block variants
Catalog number Tripping characteristic Rated operational voltage
0711852 (this page) 40 mm 800 V (IEC 60947-7-1)
0711344 8 mm 800 V (IEC 60947-7-1)
0701082 15 mm 800 V (IEC 60947-7-1)
0704076 15 mm 800 V (IEC 60947-7-1)

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 0711852 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 0711852

Phoenix Contact 0711852 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 0711852; record the nameplate data of the unit being replaced before selecting an equivalent.

  • Weight: 70 mm²/10.4 kg — Confirm the revision of the installed unit before a like-for-like replacement.
  • Rated speed: 10 (+/- 2) rpm — Use it as the reference when cross-checking a current-production equivalent.
  • Rated torque: 25 ... 30 Nm — Verify it in the project documentation before confirming the order.
  • Mounting: 35 mm DIN rail (IEC 60715) — Check this value against the nameplate of the installed unit before ordering.

Available from stock with datasheet, certificates and a quotation on request.

Common questions about 0711852

Q.Where can I find the rated speed data for 0711852?

It is listed in the specification table for Phoenix Contact 0711852 as 10 (+/- 2) rpm. Compare it with the nameplate of the installed unit before ordering.

Q.For 0711852, what does the specification table state about operating temperature?

The specification table lists operating temperature = -60 °C ... 110 °C for Phoenix Contact 0711852. Confirm this figure against the unit currently in the panel.

Q.Which value is published under frequency for catalog number 0711852?

For 0711852, frequency is given as f1= 5 Hz to f2= 250 Hz. Use the value as the reference when sourcing a current-production equivalent.

Q.Can the 0711852 replace the unit currently installed in my panel?

Compare catalog number 0711852 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Q.How do I confirm compatibility of 0711852 before ordering?

Match the catalog number 0711852 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!