Phoenix Contact · Terminal Block
0313085 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Tripping characteristic 11 mm; Rated operational voltage 800 V (IEC 60947-7-1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Tripping characteristic11 mm
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Tripping characteristic |
11 mm |
| Rated torque |
1.5 ... 1.8 Nm |
| Mechanical |
| Weight |
32.4 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.5 mm² ... 10 mm² |
| Environment and compliance |
| Operating temperature |
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) |
| Certifications |
CE, UL, cULus |
| Humidity |
20 % ... 90 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Tripping characteristic |
Rated operational voltage |
|
0313085 (this page) |
11 mm |
800 V (IEC 60947-7-1) |
| 0270018 |
9 mm |
800 V (IEC 60947-7-1) |
| 0404017 |
16 mm |
800 V (IEC 60947-7-1) |
| 0404046 |
16 mm |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0313085 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0313085
Phoenix Contact 0313085 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 0313085; record the nameplate data of the unit being replaced before selecting an equivalent.
- Humidity: 20 % ... 90 % — Match it to the existing panel and upstream protection.
- Operating temperature: -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) — Record it with the other nameplate data when sourcing a replacement.
- Terminal wire size: 0.5 mm² ... 10 mm² — Confirm the revision of the installed unit before a like-for-like replacement.
- Tripping characteristic: 11 mm — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 0313085
Q.Which value is published under weight for catalog number 0313085?
For 0313085, weight is given as 32.4 g. Confirm this figure against the unit currently in the panel.
Q.Before ordering 0313085, which tripping characteristic entry should be checked?
The tripping characteristic entry quoted above is 11 mm. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the humidity data for 0313085?
It is listed in the specification table for Phoenix Contact 0313085 as 20 % ... 90 %. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 0313085 before ordering?
Match the catalog number 0313085 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 0313085 replace the unit currently installed in my panel?
Compare catalog number 0313085 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.