IFM · I/O Module
AL3150 is an IFM I/O module with Supply voltage 12 / 24 V DC (IEC 61131-2); Enclosure rating IP 65; IP 66; IP 67 (IEC 60529); Communication ports Ethernet. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage12 / 24 V DC (IEC 61131-2)
-
Enclosure ratingIP 65; IP 66; IP 67 (IEC 60529)
-
Communication portsEthernet
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Supply voltage |
12 / 24 V DC (IEC 61131-2) |
| I/O and communication |
| Communication ports |
Ethernet |
| Response time |
< 1 ms |
| Mechanical |
| Weight |
306.4 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP 65; IP 66; IP 67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...70 °C (IEC 60068-2-1) |
| Storage temperature |
-25...85 °C |
| Certifications |
CE, cULus |
Values follow the IFM I/O Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| IFM I/O Module variants |
| Catalog number |
Supply voltage |
|
AL3150 (this page) |
8...32 V DC (IEC 61131-2) |
| AL3050 |
8...32 V DC (IEC 61131-2) |
| AL1010 |
8...32 V DC (IEC 61131-2) |
| AL1020 |
8...32 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The AL3150 is the device-level element in an IFM I/O module installation. It receives the field signals and control supply listed above — 8...32 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for IFM AL3150
IFM AL3150 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number AL3150; verify the catalog number against your bill of materials before requesting a quotation.
- Operating temperature: -25...70 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Storage temperature: -25...85 °C — Match it to the existing panel and upstream protection.
- Mounting: 35 mm DIN rail (IEC 60715) — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about AL3150
Q.Where can I find the response time data for AL3150?
It is listed in the specification table for IFM AL3150 as < 1 ms. Confirm this figure against the unit currently in the panel.
Q.For AL3150, what does the specification table state about communication ports?
The specification table lists communication ports = Ethernet for IFM AL3150. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under enclosure rating for catalog number AL3150?
For AL3150, enclosure rating is given as IP 65; IP 66; IP 67 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the AL3150 replace the unit currently installed in my panel?
Compare catalog number AL3150 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for AL3150?
Send the full catalog number AL3150, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for IFM AL3150.