IFM · I/O Module
AL1303 is an IFM circuit breaker with Rated operational voltage <= 440 V AC; Breaking capacity Icu/Ics yes; Supply voltage 24 V DC (IEC 61131-2). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated operational voltage<= 440 V AC
-
Breaking capacity Icu/Icsyes
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated operational voltage |
<= 440 V AC |
| Breaking capacity Icu/Ics |
yes |
| Supply voltage |
24 V DC (IEC 61131-2) |
| I/O and communication |
| Communication ports |
Ethernet; IO-Link |
| Mechanical |
| Weight |
395 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C |
| Storage temperature |
-25...85 °C |
| Certifications |
CE, cULus |
Values follow the IFM I/O Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| IFM I/O Module variants |
| Catalog number |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
AL1303 (this page) |
yes |
<= 440 V AC |
| AL1302 |
yes |
<= 440 V AC |
| AL1307 |
— |
— |
| AL1320 |
yes |
<= 440 V AC |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The AL1303 is the device-level element in an IFM circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the <= 440 V AC ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for IFM AL1303
IFM AL1303 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number AL1303; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Supply voltage: 24 V DC (IEC 61131-2) — Match it to the existing panel and upstream protection.
- Storage temperature: -25...85 °C — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: -25...+60 °C — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: CE, cULus — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about AL1303
Q.Where can I find the communication ports data for AL1303?
It is listed in the specification table for IFM AL1303 as Ethernet; IO-Link. Use the value as the reference when sourcing a current-production equivalent.
Q.For AL1303, what does the specification table state about breaking capacity Icu/Ics?
The specification table lists breaking capacity Icu/Ics = yes for IFM AL1303. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under weight for catalog number AL1303?
For AL1303, weight is given as 395 g. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for AL1303?
Send the full catalog number AL1303, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for IFM AL1303.
Q.How do I confirm compatibility of AL1303 before ordering?
Match the catalog number AL1303 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.