Delta · DVP Series PLC
DVPPF02-SL is a Delta PROFIBUS-DP Slave communication module. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow official Delta document 5011699803 (Installation Instructions, issued 2021-09-24), which classifies DVPPF02-SL as "PROFIBUS-DP Slave communication module". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVPPF02-SL. Numeric ratings in the table above are placeholders and must still be confirmed against the original manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta DVP Series PLC variants |
| Catalog number |
Supply voltage |
|
DVPPF02-SL (this page) |
24 V DC (IEC 61131-2) |
| DVPPS01 |
— |
| DVPPS05 |
— |
| DVP-F232 |
24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The DVPPF02-SL is the fieldbus element in a Delta control installation. It carries the bus signals between the controller and the field devices, so the bus topology, cable lengths and termination are sized to the interface parameters in the Specifications table, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DVPPF02-SL
Delta DVPPF02-SL PROFIBUS-DP Slave communication module. See the manufacturer documentation for this order number.
- Mounting: 35 mm DIN rail (IEC 60715) — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about DVPPF02-SL
Q.Which official Delta document defines DVPPF02-SL?
The official Delta document 5011699803 (Installation Instructions, issued 2021-09-24) classifies DVPPF02-SL as "PROFIBUS-DP Slave communication module". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVPPF02-SL. Use that document as the authority for ratings and installation conditions before ordering.
Q.Which value is published under enclosure rating for catalog number DVPPF02-SL?
For DVPPF02-SL, enclosure rating is given as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering DVPPF02-SL, which operating temperature entry should be checked?
The operating temperature entry in the table above still has to be confirmed against the original Delta manufacturer documentation for DVPPF02-SL before it is treated as the rating of this catalog number. The official document cited below is the reference; the value shown above is a placeholder pending that confirmation.
Q.Can the DVPPF02-SL replace the unit currently installed in my panel?
Compare catalog number DVPPF02-SL and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of DVPPF02-SL before ordering?
Match the catalog number DVPPF02-SL and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.