Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Delta · Power Supply Modules
DVP-PS02 is a Delta Power Supply Module. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Supply voltage | 24 V DC (IEC 61131-2) |
|---|---|
| Mechanical | |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue entry for this order number which classifies DVP-PS02 as "Power supply module". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVPPS02. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
| Delta Power Supply Modules variants | |
| Catalog number | Supply voltage |
|---|---|
| DVP-PS02 (this page) | 24 V DC (IEC 61131-2) |
| DVP-PSO5 | — |
| DVP-F232 | 24 V DC (IEC 61131-2) |
| DVP01LC-SL | 24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The DVP-PS02 is the power-supply element in a Delta control installation. It takes the incoming mains supply and provides the control supply that the mounted modules and the controller run on. Upstream protection and the supply conductor are sized to the input voltage range stated in the manufacturer documentation, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Delta DVP-PS02 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number DVP-PS02; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Q.Which official Delta document defines DVP-PS02?
The official Delta download-centre catalogue entry for this order number classifies DVP-PS02 as "Power supply module". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVPPS02. Use that document as the authority for ratings and installation conditions before ordering.
Q.Which value is published under mounting for catalog number DVP-PS02?
For DVP-PS02, mounting is given as 35 mm DIN rail (IEC 60715). Confirm this figure against the unit currently in the panel.
Q.Before ordering DVP-PS02, which supply voltage entry should be checked?
The supply voltage entry quoted above is 24 V DC (IEC 61131-2). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the enclosure rating data for DVP-PS02?
It is listed in the specification table for Delta DVP-PS02 as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of DVP-PS02 before ordering?
Match the catalog number DVP-PS02 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the DVP-PS02 replace the unit currently installed in my panel?
Compare catalog number DVP-PS02 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
