Delta · MODBUS Series
IFD6500 is a Delta Communication Module. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue entry for this order number which classifies IFD6500 as "RS-485/USB Communication Modul". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=IFD6500. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta MODBUS Series variants |
| Catalog number |
Mounting |
|
IFD6500 (this page) |
DIN rail / panel |
| IFD8500 |
DIN rail / panel |
| IFD8540 |
DIN rail / panel |
| ASOOSCM-A |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The IFD6500 is the fieldbus element in a Delta control installation. It carries the bus signals between the controller and the field devices, so the bus topology, cable lengths and termination are sized to the interface parameters stated in the manufacturer documentation, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta IFD6500
Delta IFD6500 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number IFD6500; record the nameplate data of the unit being replaced before selecting an equivalent.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
- Supply voltage: 24 V DC (IEC 61131-2) — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about IFD6500
Q.Which official Delta document defines IFD6500?
The official Delta download-centre catalogue entry for this order number classifies IFD6500 as "RS-485/USB Communication Modul". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=IFD6500. Use that document as the authority for ratings and installation conditions before ordering.
Q.Which value is published under operating temperature for catalog number IFD6500?
For IFD6500, operating temperature is given as 0...+55 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering IFD6500, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.Where can I find the mounting data for IFD6500?
It is listed in the specification table for Delta IFD6500 as DIN rail / panel. Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of IFD6500 before ordering?
Match the catalog number IFD6500 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the IFD6500 replace the unit currently installed in my panel?
Compare catalog number IFD6500 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.