Delta · DVP Series PLC
DVPDNET-SL is a Delta DeviceNet Network Scanner. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow official Delta document DVP-0204520-05 (Operation Manual, issued 2023-09-06), which classifies DVPDNET-SL as "DeviceNet Network Scanner". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVPDNET-SL. Numeric ratings in the table above are placeholders and must still be confirmed against the original manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta DVP Series PLC variants |
| Catalog number |
Supply voltage |
|
DVPDNET-SL (this page) |
24 V DC (IEC 61131-2) |
| DVP-F232 |
24 V DC (IEC 61131-2) |
| DVP-PS02 |
24 V DC (IEC 61131-2) |
| DVP-PSO5 |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The DVPDNET-SL is the fieldbus element in a Delta control installation. It carries the bus signals between the controller and the field devices, so the bus topology, cable lengths and termination are sized to the interface parameters in the Specifications table, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DVPDNET-SL
Delta DVPDNET-SL DeviceNet Network Scanner. See the manufacturer documentation for this order number.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
- Mounting: 35 mm DIN rail (IEC 60715) — Verify it in the project documentation before confirming the order.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about DVPDNET-SL
Q.Which official Delta document defines DVPDNET-SL?
The official Delta document DVP-0204520-05 (Operation Manual, issued 2023-09-06) classifies DVPDNET-SL as "DeviceNet Network Scanner". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DVPDNET-SL. Use that document as the authority for ratings and installation conditions before ordering.
Q.Where can I find the enclosure rating data for DVPDNET-SL?
It is listed in the specification table for Delta DVPDNET-SL as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under mounting for catalog number DVPDNET-SL?
For DVPDNET-SL, mounting is given as 35 mm DIN rail (IEC 60715). Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for DVPDNET-SL?
Send the full catalog number DVPDNET-SL, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta DVPDNET-SL.
Q.How do I confirm compatibility of DVPDNET-SL before ordering?
Match the catalog number DVPDNET-SL and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.