Allen-Bradley · Compact 5000 I/O
5069-L3100ERMS2 is an Allen-Bradley PLC controller with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Communication ports EtherNet/IP, DeviceNet. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Allen-Bradley Compact 5000 I/O specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Allen-Bradley Compact 5000 I/O variants |
| Catalog number |
Supply voltage |
|
5069-L3100ERMS2 (this page) |
24 V DC (IEC 61131-2) |
| 5069-L3100ERMS3 |
24 V DC (IEC 61131-2) |
| 5069-L3100ERM |
24 V DC (IEC 61131-2) |
| 5069-L3100ERS2 |
24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 5069-L3100ERMS2 is the device-level element in an Allen-Bradley PLC controller installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Allen-Bradley 5069-L3100ERMS2
Allen-Bradley 5069-L3100ERMS2 — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number 5069-L3100ERMS2; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
- Mounting: 35 mm DIN rail (IEC 60715) — Record it with the other nameplate data when sourcing a replacement.
- Supply voltage: 24 V DC (IEC 61131-2) — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 5069-L3100ERMS2
Q.Where can I find the operating temperature data for 5069-L3100ERMS2?
It is listed in the specification table for Allen-Bradley 5069-L3100ERMS2 as 0...+55 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.For 5069-L3100ERMS2, what does the specification table state about supply voltage?
The specification table lists supply voltage = 24 V DC (IEC 61131-2) for Allen-Bradley 5069-L3100ERMS2. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under certifications for catalog number 5069-L3100ERMS2?
For 5069-L3100ERMS2, certifications is given as CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.Can the 5069-L3100ERMS2 replace the unit currently installed in my panel?
Compare catalog number 5069-L3100ERMS2 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 5069-L3100ERMS2 before ordering?
Match the catalog number 5069-L3100ERMS2 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.