Allen-Bradley · ControlLogix PLC platform
1756-CN2RK is an Allen-Bradley industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Allen-Bradley ControlLogix PLC platform specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Allen-Bradley ControlLogix PLC platform variants |
| Catalog number |
Mounting |
|
1756-CN2RK (this page) |
DIN rail / panel |
| 1756-CN2R |
DIN rail / panel |
| 1756-CN2RXT |
DIN rail / panel |
| 1756-CN2 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1756-CN2RK is the device-level element in an Allen-Bradley industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Allen-Bradley 1756-CN2RK
Allen-Bradley 1756-CN2RK — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1756-CN2RK; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Supply voltage: 24 V DC (IEC 61131-2) — Match it to the existing panel and upstream protection.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
- Mounting: DIN rail / panel — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1756-CN2RK
Q.Where can I find the operating temperature data for 1756-CN2RK?
It is listed in the specification table for Allen-Bradley 1756-CN2RK as 0...+55 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1756-CN2RK, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Allen-Bradley 1756-CN2RK. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under supply voltage for catalog number 1756-CN2RK?
For 1756-CN2RK, supply voltage is given as 24 V DC (IEC 61131-2). Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 1756-CN2RK before ordering?
Match the catalog number 1756-CN2RK and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1756-CN2RK replace the unit currently installed in my panel?
Compare catalog number 1756-CN2RK and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.