Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Power Meter
2906235 is a Phoenix Contact contactor with Rated current Ie 0 A AC ... 100 A AC; Coil voltage Elastollan; Supply voltage 100...240 V AC / 24 V DC. It is used in motor starters, pump control panels, HVAC contactor banks where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated current Ie | 0 A AC ... 100 A AC |
|---|---|
| Rated insulation voltage Ui | 300 V |
| Tripping characteristic | 10 mm |
| Coil voltage | Elastollan |
| Supply voltage | 100...240 V AC / 24 V DC |
| Output voltage | V OUT = M * dI/dt |
| Power consumption | ≤ 1 W (at I OUT = 20 mA, 9.6 V DC, 600 Ω load) |
| Frequency | 16 Hz ... 1000 Hz |
| I/O and communication | |
| Response time | 110 ms |
| Mechanical | |
| Weight | 450.125 g |
| Mounting | DIN rail / panel |
| Terminal wire size | 2x 0.22 mm (Signal (tinned)) |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
| Humidity | 5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Power Meter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Power Meter variants | |||
| Catalog number | Coil voltage | Rated current Ie | |
|---|---|---|---|
| 2906235 (this page) | Elastollan | 0 A AC ... 100 A AC | |
| 2906233 | Elastollan | 0 A AC ... 100 A AC | |
| 2906236 | Elastollan | 0 A AC ... 100 A AC | |
| 2904921 | Elastollan | 0 A AC ... 100 A AC | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2906235 is the device-level element in a Phoenix Contact contactor installation. It receives the field signals and control supply listed above — 100...240 V AC / 24 V DC — and switches or conditions the load within the 0 A AC ... 100 A AC ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in motor starters, pump control panels, HVAC contactor banks, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2906235 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2906235; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
Cross-check the ratings above with the installed device before confirming the order.
Q.Where can I find the response time data for 2906235?
It is listed in the specification table for Phoenix Contact 2906235 as 110 ms. Use the value as the reference when sourcing a current-production equivalent.
Q.For 2906235, what does the specification table state about rated current Ie?
The specification table lists rated current Ie = 0 A AC ... 100 A AC for Phoenix Contact 2906235. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under frequency for catalog number 2906235?
For 2906235, frequency is given as 16 Hz ... 1000 Hz. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 2906235 before ordering?
Match the catalog number 2906235 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 2906235?
Send the full catalog number 2906235, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2906235.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
