Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Contactron motor starter
2901995 is a Phoenix Contact industrial component with Supply voltage 9.6 V DC ... 30 V DC (loop-powered, no external supply necessary); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated insulation voltage Ui | 300 V rms |
|---|---|
| Tripping characteristic | 10 mm |
| Supply voltage | 9.6 V DC ... 30 V DC (loop-powered, no external supply necessary) |
| Input voltage range | 30 V |
| Power consumption | 600 mW |
| Frequency | 100 Hz |
| I/O and communication | |
| Response time | ~ 200 µA (-15°C ... +70°C) |
| Mechanical | |
| Weight | 109 g |
| Mounting | DIN rail / panel |
| Terminal wire size | 0.2 mm² ... 2.5 mm² (with ferrule) |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
| Humidity | 5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Contactron motor starter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Contactron motor starter variants | |||
| Catalog number | Mounting | ||
|---|---|---|---|
| 2901995 (this page) | DIN rail / panel | ||
| 2901994 | DIN rail / panel | ||
| 2901996 | DIN rail / panel | ||
| 2901103 | DIN rail / panel | ||
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2901995 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 9.6 V DC ... 30 V DC (loop-powered, no external supply necessary) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2901995 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2901995; record the nameplate data of the unit being replaced before selecting an equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Q.Which value is published under supply voltage for catalog number 2901995?
For 2901995, supply voltage is given as 9.6 V DC ... 30 V DC (loop-powered, no external supply necessary). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 2901995, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the input voltage range data for 2901995?
It is listed in the specification table for Phoenix Contact 2901995 as 30 V. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 2901995 before ordering?
Match the catalog number 2901995 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2901995 replace the unit currently installed in my panel?
Compare catalog number 2901995 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
