Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Contactron motor starter
2297109 is a Phoenix Contact circuit breaker with Tripping characteristic B / C / D (IEC 60947-2); Number of poles 1 / 2 / 3 / 4 (IEC 60947-2); Breaking capacity Icu/Ics 6 kA / 10 kA (IEC 60947-2). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated insulation voltage Ui | 440 V (IEC 60947-2) |
|---|---|
| Rated impulse withstand Uimp | 4 kV (IEC 60947-2) |
| Breaking capacity Icu/Ics | 6 kA / 10 kA (IEC 60947-2) |
| Tripping characteristic | B / C / D (IEC 60947-2) |
| Number of poles | 1 / 2 / 3 / 4 (IEC 60947-2) |
| Frequency | ≤ 2 Hz (Load-dependent) |
| Rated torque | 0.5 Nm ... 0.6 Nm |
| Mechanical | |
| Weight | 250.4 g |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Terminal wire size | 0.2 mm² ... 2.5 mm² |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -25...+60 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
Values follow the Phoenix Contact Contactron motor starter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Contactron motor starter variants | |||
| Catalog number | Tripping characteristic | Breaking capacity Icu/Ics | |
|---|---|---|---|
| 2297109 (this page) | B / C / D (IEC 60947-2) | 6 kA / 10 kA (IEC 60947-2) | |
| 2297031 | B / C / D (IEC 60947-2) | 6 kA / 10 kA (IEC 60947-2) | |
| 2297044 | B / C / D (IEC 60947-2) | 6 kA / 10 kA (IEC 60947-2) | |
| 2297057 | B / C / D (IEC 60947-2) | 6 kA / 10 kA (IEC 60947-2) | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2297109 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2297109 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2297109; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Q.Before ordering 2297109, which number of poles entry should be checked?
The number of poles entry quoted above is 1 / 2 / 3 / 4 (IEC 60947-2). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the rated insulation voltage Ui data for 2297109?
It is listed in the specification table for Phoenix Contact 2297109 as 440 V (IEC 60947-2). Compare it with the nameplate of the installed unit before ordering.
Q.For 2297109, what does the specification table state about mounting?
The specification table lists mounting = 35 mm DIN rail (IEC 60715) for Phoenix Contact 2297109. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 2297109 before ordering?
Match the catalog number 2297109 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 2297109?
Send the full catalog number 2297109, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2297109.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
