Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Contactron motor starter
2901362 is a Phoenix Contact circuit breaker with Breaking capacity Icu/Ics up to 51st harmonic; Supply voltage 110 V AC ... 277 V AC -10 % ... +15 %; Enclosure rating IP20 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated insulation voltage Ui | 300 V AC (EN 61010-1) |
|---|---|
| Breaking capacity Icu/Ics | up to 51st harmonic |
| Supply voltage | 110 V AC ... 277 V AC -10 % ... +15 % |
| Input voltage range | 50 V AC ... 519 V AC (Phase/Phase) |
| Power consumption | 5 VA |
| Overload capacity | 6 A (Permanent) |
| I/O and communication | |
| Response time | 5 mA |
| Mechanical | |
| Weight | 312.7 g |
| Mounting | DIN rail / panel |
| Terminal wire size | 0.5 mm² ... 2.5 mm² |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
| Humidity | ≤ 95 % |
Values follow the Phoenix Contact Contactron motor starter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Contactron motor starter variants | |||
| Catalog number | Tripping characteristic | Breaking capacity Icu/Ics | |
|---|---|---|---|
| 2901362 (this page) | — | up to 51st harmonic | |
| 2901364 | 6 mm | up to 51st harmonic | |
| 2901371 | 6 mm | — | |
| 2901103 | — | — | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2901362 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 110 V AC ... 277 V AC -10 % ... +15 % — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2901362 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2901362; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
Cross-check the ratings above with the installed device before confirming the order.
Q.For 2901362, what does the specification table state about humidity?
The specification table lists humidity = ≤ 95 % for Phoenix Contact 2901362. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under rated insulation voltage Ui for catalog number 2901362?
For 2901362, rated insulation voltage Ui is given as 300 V AC (EN 61010-1). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 2901362, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 2901362?
Send the full catalog number 2901362, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2901362.
Q.How do I confirm compatibility of 2901362 before ordering?
Match the catalog number 2901362 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
