Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Terminal Block
2700718 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Breaking capacity Icu/Ics Copper. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated current Ie | up to 41 A (IEC 60947-7-1) |
|---|---|
| Rated operational voltage | 800 V (IEC 60947-7-1) |
| Breaking capacity Icu/Ics | Copper |
| Frequency | 2.4 GHz |
| Rated speed | 10/100 Mbps |
| Mechanical | |
| Dimensions (H x W x D) | Height with antenna socket, without antenna cable |
| Weight | 540.3 g |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Environment and compliance | |
| Operating temperature | -40 °C ... 80 °C |
| Certifications | CE, UL, cULus |
| Humidity | 10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Terminal Block variants | |||
| Catalog number | Breaking capacity Icu/Ics | Rated operational voltage | |
|---|---|---|---|
| 2700718 (this page) | Copper | 800 V (IEC 60947-7-1) | |
| 2700784 | yes | 800 V (IEC 60947-7-1) | |
| 2700270 | — | 800 V (IEC 60947-7-1) | |
| 2700453 | — | 800 V (IEC 60947-7-1) | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2700718 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2700718 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2700718; verify the catalog number against your bill of materials before requesting a quotation.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Q.Where can I find the rated current Ie data for 2700718?
It is listed in the specification table for Phoenix Contact 2700718 as up to 41 A (IEC 60947-7-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.For 2700718, what does the specification table state about rated operational voltage?
The specification table lists rated operational voltage = 800 V (IEC 60947-7-1) for Phoenix Contact 2700718. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under weight for catalog number 2700718?
For 2700718, weight is given as 540.3 g. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 2700718 before ordering?
Match the catalog number 2700718 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2700718 replace the unit currently installed in my panel?
Compare catalog number 2700718 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
