Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Safety Relay
2700524 is a Phoenix Contact industrial component with Supply voltage 24 V AC/DC ... 230 V AC/DC -15 % / +10 %; Enclosure rating IP20 (IEC 60529); Operating temperature -25...+60 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated insulation voltage Ui | 690 V (IEC 60947-4-1) |
|---|---|
| Rated impulse withstand Uimp | 6 kV (IEC 60947-4-1) |
| Tripping characteristic | 7 mm |
| Supply voltage | 24 V AC/DC ... 230 V AC/DC -15 % / +10 % |
| Input voltage range | 0 V DC ... 5 V DC (for safe Off; at S10/S12/S13) |
| Power consumption | 2.7 W (with DC) |
| Frequency | max. 1 Hz |
| Rated torque | 0.5 Nm ... 0.6 Nm |
| I/O and communication | |
| Safety integrity SIL/PL | 3 |
| Mechanical | |
| Weight | 225.2 g |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Terminal wire size | 150 Ω |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -25...+60 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
| Humidity | 75 % (on average, 85% infrequently, non-condensing) |
| Degree of protection | IP54 |
Values follow the Phoenix Contact Safety Relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Safety Relay variants | |||
| Catalog number | Mounting | ||
|---|---|---|---|
| 2700524 (this page) | 35 mm DIN rail (IEC 60715) | ||
| 2700525 | 35 mm DIN rail (IEC 60715) | ||
| 2700540 | 35 mm DIN rail (IEC 60715) | ||
| 2700569 | 35 mm DIN rail (IEC 60715) | ||
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2700524 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 24 V AC/DC ... 230 V AC/DC -15 % / +10 % — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2700524 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2700524; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Q.For 2700524, what does the specification table state about input voltage range?
The specification table lists input voltage range = 0 V DC ... 5 V DC (for safe Off; at S10/S12/S13) for Phoenix Contact 2700524. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under enclosure rating for catalog number 2700524?
For 2700524, enclosure rating is given as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 2700524, which operating temperature entry should be checked?
The operating temperature entry quoted above is -25...+60 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 2700524 before ordering?
Match the catalog number 2700524 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 2700524?
Send the full catalog number 2700524, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2700524.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
