Phoenix Contact · Front Adapter
2302777 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated insulation voltage Ui |
63 V |
| Mechanical |
| Weight |
69.2 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Front Adapter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Front Adapter variants |
| Catalog number |
Mounting |
|
2302777 (this page) |
DIN rail / panel |
| 2320089 |
DIN rail / panel |
| 2320458 |
DIN rail / panel |
| 2322456 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2302777 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2302777
Phoenix Contact 2302777 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2302777; verify the catalog number against your bill of materials before requesting a quotation.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Weight: 69.2 g — Verify it in the project documentation before confirming the order.
- Rated insulation voltage Ui: 63 V — Check this value against the nameplate of the installed unit before ordering.
- Mounting: DIN rail / panel — Match it to the existing panel and upstream protection.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 2302777
Q.For 2302777, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Phoenix Contact 2302777. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under weight for catalog number 2302777?
For 2302777, weight is given as 69.2 g. Confirm this figure against the unit currently in the panel.
Q.Before ordering 2302777, which operating temperature entry should be checked?
The operating temperature entry quoted above is 0...+55 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 2302777 replace the unit currently installed in my panel?
Compare catalog number 2302777 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 2302777 before ordering?
Match the catalog number 2302777 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.