Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
WAGO · EPSITRON® CLASSIC power supply
787-1602 is a WAGO EPSITRON® CLASSIC power supply. Enclosure rating: IP20; per EN 60529; Operating temperature: -25 … +70 °C (Device starts at -40 °C (type-tested)); Mounting: DIN-35 rail; Conformity marking: CE. It is used in control panels, machine builds and spare-part replacements where the installed unit is matched to the original catalog number and a documented part is required.
| Safety and protection | |
| Isolation voltage (pri.-sec.) | 4.242 kVDC |
|---|---|
| Protection class | II |
| Overvoltage category | II |
| Pollution degree | 2 |
| Enclosure rating | IP20; per EN 60529 |
| Short-circuit-protected | Yes |
| Open-circuit-proof | Yes |
| Parallel operation | Yes |
| Mechanical data | |
| Mounting | DIN-35 rail |
| Physical data | |
| Width | 22.5 mm / 0.886 inches |
| Height | 90 mm / 3.543 inches |
| Depth from upper-edge of DIN-rail | 107.5 mm / 4.232 inches |
| Material data | |
| Weight | 128 g |
| Environmental requirements | |
| Operating temperature | -25 … +70 °C (Device starts at -40 °C (type-tested)) |
| Storage temperature | -25 … +85 °C |
| Relative humidity | 5 … 96 % (no condensation permissible) |
| Derating | -3 %/K (> 50 °C) |
| Climatic category | 3K3 (per EN 60721) |
| Standards and Specifications | |
| Conformity marking | CE |
| Standards and specifications | EN 61010-1; EN 61010-2-201; EN 61204-3; EN 60335-1; UL 60950-1; UL 508; DNV; SEMI F47 |
Values follow the WAGO official technical data published for catalog number 787-1602; parameters not confirmed for this variant are omitted rather than estimated.
The 787-1602 is the device-level element in a WAGO EPSITRON® CLASSIC power supply installation. It receives the field signals and control supply listed above and switches or conditions the load within the ratings shown in the Specifications table. Wiring and protective devices are sized against enclosure rating IP20; per EN 60529, operating temperature -25 … +70 °C (Device starts at -40 °C (type-tested)), mounting DIN-35 rail — not against a generic assumption.
Typical installations place it in control panels, machine builds and spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides the mounting support listed above. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
WAGO 787-1602 — WAGO industrial component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the WAGO official specification for catalog number 787-1602; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
Cross-check the ratings above with the installed device before confirming the order.
Q.Where can I find the isolation voltage (pri.-sec.) data for 787-1602?
It is listed in the specification table for WAGO 787-1602 as 4.242 kVDC. Use the value as the reference when sourcing a current-production equivalent.
Q.For 787-1602, what does the specification table state about protection class?
The specification table lists Protection class = II for WAGO 787-1602. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under overvoltage category for catalog number 787-1602?
For 787-1602, overvoltage category is given as II. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 787-1602?
Send the full catalog number 787-1602, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for WAGO 787-1602.
Q.How do I confirm compatibility of 787-1602 before ordering?
Match the catalog number 787-1602 and the specification values listed above against the installed unit, then confirm the hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
