Siemens · SINAMICS drive / power module
6SL3210-5BB17-5UV0 is a Siemens variable-frequency drive with Rated operational voltage 1-phase 200-240 V / 3-phase 380-480 V; Overload capacity 150% for 60 s; Enclosure rating IP20 (IEC 60529). It is used in pump sets, conveyor belts, fan and compressor drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated operational voltage1-phase 200-240 V / 3-phase 380-480 V
-
Overload capacity150% for 60 s
-
Enclosure ratingIP20 (IEC 60529)
-
Frequency50/60 Hz
Specifications
| Electrical |
| Rated operational voltage |
1-phase 200-240 V / 3-phase 380-480 V |
| Supply voltage |
1-phase 200...240 V / 3-phase 380...480 V AC |
| Frequency |
50/60 Hz |
| Control method |
V/f, sensorless vector (IEC 61800-2) |
| Overload capacity |
150% for 60 s |
| Mechanical |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+40 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Siemens SINAMICS drive / power module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Siemens SINAMICS drive / power module variants |
| Catalog number |
Overload capacity |
Rated operational voltage |
Frequency |
|
6SL3210-5BB17-5UV0 (this page) |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| 6SL3210-5BB13-7UV1 |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| 6SL3210-1KE11-8AF2C |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| 6SL3210-1KE12-3AB2 |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Selection notes for Siemens 6SL3210-5BB17-5UV0
Siemens 6SL3210-5BB17-5UV0 — Variable frequency drive for motor speed and torque control in pumps, fans, conveyors and general industrial machinery. The figures below are taken from the specification table on this page for catalog number 6SL3210-5BB17-5UV0; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Overload capacity: 150% for 60 s — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Control method: V/f, sensorless vector (IEC 61800-2) — Verify it in the project documentation before confirming the order.
- Operating temperature: 0...+40 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 6SL3210-5BB17-5UV0
Q.Where can I find the operating temperature data for 6SL3210-5BB17-5UV0?
It is listed in the specification table for Siemens 6SL3210-5BB17-5UV0 as 0...+40 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.For 6SL3210-5BB17-5UV0, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Siemens 6SL3210-5BB17-5UV0. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under enclosure rating for catalog number 6SL3210-5BB17-5UV0?
For 6SL3210-5BB17-5UV0, enclosure rating is given as IP20 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 6SL3210-5BB17-5UV0?
Send the full catalog number 6SL3210-5BB17-5UV0, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Siemens 6SL3210-5BB17-5UV0.
Q.Can the 6SL3210-5BB17-5UV0 replace the unit currently installed in my panel?
Compare catalog number 6SL3210-5BB17-5UV0 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.