Siemens · SINAMICS drive / power module
6SL3210-5BB13-7UV1 is a Siemens variable-frequency drive with Rated operational voltage 1-phase 200-240 V / 3-phase 380-480 V; Overload capacity 150% for 60 s; Enclosure rating IP20 (IEC 60529). It is used in pump sets, conveyor belts, fan and compressor drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated operational voltage1-phase 200-240 V / 3-phase 380-480 V
-
Overload capacity150% for 60 s
-
Enclosure ratingIP20 (IEC 60529)
-
Frequency50/60 Hz
Specifications
| Electrical |
| Rated operational voltage |
1-phase 200-240 V / 3-phase 380-480 V |
| Supply voltage |
1-phase 200...240 V / 3-phase 380...480 V AC |
| Frequency |
50/60 Hz |
| Control method |
V/f, sensorless vector (IEC 61800-2) |
| Overload capacity |
150% for 60 s |
| Mechanical |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+40 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Siemens SINAMICS drive / power module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Siemens SINAMICS drive / power module variants |
| Catalog number |
Overload capacity |
Rated operational voltage |
Frequency |
|
6SL3210-5BB13-7UV1 (this page) |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| 6SL3210-5BB17-5UV0 |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| 6SL3210-1KE11-8AF2C |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
| 6SL3210-1KE12-3AB2 |
150% for 60 s |
1-phase 200-240 V / 3-phase 380-480 V |
50/60 Hz |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Selection notes for Siemens 6SL3210-5BB13-7UV1
Siemens 6SL3210-5BB13-7UV1 — Variable frequency drive for motor speed and torque control in pumps, fans, conveyors and general industrial machinery. The figures below are taken from the specification table on this page for catalog number 6SL3210-5BB13-7UV1; verify the catalog number against your bill of materials before requesting a quotation.
- Overload capacity: 150% for 60 s — Match it to the existing panel and upstream protection.
- Enclosure rating: IP20 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Control method: V/f, sensorless vector (IEC 61800-2) — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: 0...+40 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 6SL3210-5BB13-7UV1
Q.Where can I find the enclosure rating data for 6SL3210-5BB13-7UV1?
It is listed in the specification table for Siemens 6SL3210-5BB13-7UV1 as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.For 6SL3210-5BB13-7UV1, what does the specification table state about supply voltage?
The specification table lists supply voltage = 1-phase 200...240 V / 3-phase 380...480 V AC for Siemens 6SL3210-5BB13-7UV1. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under overload capacity for catalog number 6SL3210-5BB13-7UV1?
For 6SL3210-5BB13-7UV1, overload capacity is given as 150% for 60 s. Confirm this figure against the unit currently in the panel.
Q.Can the 6SL3210-5BB13-7UV1 replace the unit currently installed in my panel?
Compare catalog number 6SL3210-5BB13-7UV1 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 6SL3210-5BB13-7UV1 before ordering?
Match the catalog number 6SL3210-5BB13-7UV1 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.