ProSoft Technology · Communication / gateway module
MVI46-AFC is a ProSoft Technology industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+60 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+60 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| I/O and communication |
| Response time |
< 1 ms |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the ProSoft Technology Communication / gateway module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| ProSoft Technology Communication / gateway module variants |
| Catalog number |
Mounting |
|
MVI46-AFC (this page) |
DIN rail / panel |
| MVI46-ADM |
DIN rail / panel |
| MVI46-ADMNET |
DIN rail / panel |
| MVI46-3964R |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The MVI46-AFC is the device-level element in a ProSoft Technology industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial MVI46-AFC
Industrial MVI46-AFC — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number MVI46-AFC; record the nameplate data of the unit being replaced before selecting an equivalent.
- Operating temperature: 0...+60 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Mounting: DIN rail / panel — Match it to the existing panel and upstream protection.
- Response time: < 1 ms — Record it with the other nameplate data when sourcing a replacement.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about MVI46-AFC
Q.Which value is published under operating temperature for catalog number MVI46-AFC?
For MVI46-AFC, operating temperature is given as 0...+60 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.
Q.Before ordering MVI46-AFC, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the response time data for MVI46-AFC?
It is listed in the specification table for Industrial MVI46-AFC as < 1 ms. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of MVI46-AFC before ordering?
Match the catalog number MVI46-AFC and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the MVI46-AFC replace the unit currently installed in my panel?
Compare catalog number MVI46-AFC and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.