ProSoft Technology · Wireless Module
ILX34-AENWG is a ProSoft Technology industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature -20...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature-20...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-20...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the ProSoft Technology Wireless Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| ProSoft Technology Wireless Module variants |
| Catalog number |
Mounting |
|
ILX34-AENWG (this page) |
DIN rail / panel |
| RLX2-IFH24E |
DIN rail / panel |
| RLX2-IHNF-A |
DIN rail / panel |
| RLX2-IHNF-E |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The ILX34-AENWG is the device-level element in a ProSoft Technology industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial ILX34-AENWG
Industrial ILX34-AENWG — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number ILX34-AENWG; record the nameplate data of the unit being replaced before selecting an equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Mounting: DIN rail / panel — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: -20...+55 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Enclosure rating: IP20 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about ILX34-AENWG
Q.Which value is published under certifications for catalog number ILX34-AENWG?
For ILX34-AENWG, certifications is given as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering ILX34-AENWG, which mounting entry should be checked?
The mounting entry quoted above is DIN rail / panel. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the operating temperature data for ILX34-AENWG?
It is listed in the specification table for Industrial ILX34-AENWG as -20...+55 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.Can the ILX34-AENWG replace the unit currently installed in my panel?
Compare catalog number ILX34-AENWG and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of ILX34-AENWG before ordering?
Match the catalog number ILX34-AENWG and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.