ProSoft Technology · Gateway
5210-DFNT-RIO is a ProSoft Technology industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature -20...+50 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature-20...+50 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| I/O and communication |
| Response time |
< 1 ms |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-20...+50 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the ProSoft Technology Gateway specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 5210-DFNT-RIO is the device-level element in a ProSoft Technology industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial 5210-DFNT-RIO
Industrial 5210-DFNT-RIO — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 5210-DFNT-RIO; record the nameplate data of the unit being replaced before selecting an equivalent.
- Operating temperature: -20...+50 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Supply voltage: 24 V DC (IEC 61131-2) — Match it to the existing panel and upstream protection.
- Enclosure rating: IP20 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 5210-DFNT-RIO
Q.Where can I find the mounting data for 5210-DFNT-RIO?
It is listed in the specification table for Industrial 5210-DFNT-RIO as DIN rail / panel. Confirm this figure against the unit currently in the panel.
Q.For 5210-DFNT-RIO, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Industrial 5210-DFNT-RIO. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under operating temperature for catalog number 5210-DFNT-RIO?
For 5210-DFNT-RIO, operating temperature is given as -20...+50 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 5210-DFNT-RIO replace the unit currently installed in my panel?
Compare catalog number 5210-DFNT-RIO and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 5210-DFNT-RIO?
Send the full catalog number 5210-DFNT-RIO, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Industrial 5210-DFNT-RIO.