ProSoft Technology · Gateway
5204-DFNT-PDPMV1 is a ProSoft Technology industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature -20...+50 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature-20...+50 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| I/O and communication |
| Response time |
< 1 ms |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-20...+50 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the ProSoft Technology Gateway specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 5204-DFNT-PDPMV1 is the device-level element in a ProSoft Technology industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial 5204-DFNT-PDPMV1
Industrial 5204-DFNT-PDPMV1 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 5204-DFNT-PDPMV1; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Operating temperature: -20...+50 °C (IEC 60068-2-1) — Verify it in the project documentation before confirming the order.
- Supply voltage: 24 V DC (IEC 61131-2) — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Response time: < 1 ms — Record it with the other nameplate data when sourcing a replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 5204-DFNT-PDPMV1
Q.Where can I find the enclosure rating data for 5204-DFNT-PDPMV1?
It is listed in the specification table for Industrial 5204-DFNT-PDPMV1 as IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.For 5204-DFNT-PDPMV1, what does the specification table state about response time?
The specification table lists response time = < 1 ms for Industrial 5204-DFNT-PDPMV1. Confirm this figure against the unit currently in the panel.
Q.Which value is published under operating temperature for catalog number 5204-DFNT-PDPMV1?
For 5204-DFNT-PDPMV1, operating temperature is given as -20...+50 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 5204-DFNT-PDPMV1 replace the unit currently installed in my panel?
Compare catalog number 5204-DFNT-PDPMV1 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 5204-DFNT-PDPMV1 before ordering?
Match the catalog number 5204-DFNT-PDPMV1 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.