Pro-face · SP5000 smart portal HMI
PFXSP5700WCD is a Pro-face HMI panel with Screen size 15.6 inch wide; Resolution 1366 x 768 FWXGA; Supply voltage 24 V DC (IEC 60950-1). It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Screen size15.6 inch wide
-
Resolution1366 x 768 FWXGA
-
Supply voltage24 V DC (IEC 60950-1)
-
Cutout dimensions396 x 277 mm
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 60950-1) |
| Power consumption |
42 W / 17 W |
| I/O and communication |
| Resolution |
1366 x 768 FWXGA |
| Screen size |
15.6 inch wide |
| Mechanical |
| Dimensions (H x W x D) |
414 x 295 x 69 mm |
| Weight |
5 kg |
| Mounting |
Panel mount (IEC 60529) |
| Enclosure rating |
IP65 (IEC 60529) front |
| Cutout dimensions |
396 x 277 mm |
| Backlight life |
50000 hours |
| Touch type |
Resistive film (analog) |
| Environment and compliance |
| Operating temperature |
0...+50 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Pro-face SP5000 smart portal HMI specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Pro-face SP5000 smart portal HMI variants |
| Catalog number |
Cutout dimensions |
Screen size |
Supply voltage |
|
PFXSP5700WCD (this page) |
396 x 277 mm |
15.6 inch wide |
24 V DC (IEC 60950-1) |
| PFXSP5700TPD |
383.5 x 282.5 mm |
15 inch |
24 V DC (IEC 60950-1) |
| PFXSP5790WAD |
394 x 250 mm |
15.6 inch wide, outdoor |
24 V DC (IEC 60950-1) |
| PFXSP5490WAD |
190 x 135 mm |
7 inch wide, outdoor |
24 V DC (IEC 60950-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The PFXSP5700WCD is the device-level element in a Pro-face HMI panel installation. It receives the field signals and control supply listed above — 24 V DC (IEC 60950-1) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Panel mount (IEC 60529) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial PFXSP5700WCD
Industrial PFXSP5700WCD — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number PFXSP5700WCD; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Dimensions (H x W x D): 414 x 295 x 69 mm — Use it as the reference when cross-checking a current-production equivalent.
- Resolution: 1366 x 768 FWXGA — Verify it in the project documentation before confirming the order.
- Weight: 5 kg — Check this value against the nameplate of the installed unit before ordering.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about PFXSP5700WCD
Q.For PFXSP5700WCD, what does the specification table state about weight?
The specification table lists weight = 5 kg for Industrial PFXSP5700WCD. Confirm this figure against the unit currently in the panel.
Q.Which value is published under resolution for catalog number PFXSP5700WCD?
For PFXSP5700WCD, resolution is given as 1366 x 768 FWXGA. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering PFXSP5700WCD, which dimensions (H x W x D) entry should be checked?
The dimensions (H x W x D) entry quoted above is 414 x 295 x 69 mm. Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the PFXSP5700WCD replace the unit currently installed in my panel?
Compare catalog number PFXSP5700WCD and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for PFXSP5700WCD?
Send the full catalog number PFXSP5700WCD, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Industrial PFXSP5700WCD.