Pro-face · SP5000 smart portal HMI
PFXSP5490WAD is a Pro-face HMI panel with Screen size 7 inch wide, outdoor; Resolution 800 x 480 WVGA; Supply voltage 24 V DC (IEC 60950-1). It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Screen size7 inch wide, outdoor
-
Resolution800 x 480 WVGA
-
Supply voltage24 V DC (IEC 60950-1)
-
Cutout dimensions190 x 135 mm
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 60950-1) |
| Power consumption |
29 W / 17.5 W |
| I/O and communication |
| Resolution |
800 x 480 WVGA |
| Screen size |
7 inch wide, outdoor |
| Mechanical |
| Dimensions (H x W x D) |
203.6 x 148.6 x 37 mm |
| Weight |
1.3 kg |
| Mounting |
Panel mount (IEC 60529) |
| Enclosure rating |
IP65 (IEC 60529) front |
| Cutout dimensions |
190 x 135 mm |
| Backlight life |
50000 hours |
| Touch type |
Resistive film (analog) |
| Environment and compliance |
| Operating temperature |
0...+50 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Pro-face SP5000 smart portal HMI specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Pro-face SP5000 smart portal HMI variants |
| Catalog number |
Cutout dimensions |
Screen size |
Supply voltage |
|
PFXSP5490WAD (this page) |
190 x 135 mm |
7 inch wide, outdoor |
24 V DC (IEC 60950-1) |
| PFXSP5500WAD |
255 x 185 mm |
10 inch wide |
24 V DC (IEC 60950-1) |
| PFXSP5600TAD |
301.5 x 227.5 mm |
12.1 inch |
24 V DC (IEC 60950-1) |
| PFXSP5600TPDRB4TY2 |
301.5 x 227.5 mm |
12.1 inch |
24 V DC (IEC 60950-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The PFXSP5490WAD is the device-level element in a Pro-face HMI panel installation. It receives the field signals and control supply listed above — 24 V DC (IEC 60950-1) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Panel mount (IEC 60529) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial PFXSP5490WAD
Industrial PFXSP5490WAD — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number PFXSP5490WAD; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Weight: 1.3 kg — Verify it in the project documentation before confirming the order.
- Cutout dimensions: 190 x 135 mm — Check this value against the nameplate of the installed unit before ordering.
- Mounting: Panel mount (IEC 60529) — Match it to the existing panel and upstream protection.
- Enclosure rating: IP65 (IEC 60529) front — Record it with the other nameplate data when sourcing a replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about PFXSP5490WAD
Q.Which value is published under touch type for catalog number PFXSP5490WAD?
For PFXSP5490WAD, touch type is given as Resistive film (analog). Confirm this figure against the unit currently in the panel.
Q.Before ordering PFXSP5490WAD, which operating temperature entry should be checked?
The operating temperature entry quoted above is 0...+50 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the dimensions (H x W x D) data for PFXSP5490WAD?
It is listed in the specification table for Industrial PFXSP5490WAD as 203.6 x 148.6 x 37 mm. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of PFXSP5490WAD before ordering?
Match the catalog number PFXSP5490WAD and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the PFXSP5490WAD replace the unit currently installed in my panel?
Compare catalog number PFXSP5490WAD and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.