Pro-face · SP5000 smart portal HMI
PFXSP5600TAD is a Pro-face HMI panel with Screen size 12.1 inch; Resolution 1024 x 768 XGA; Supply voltage 24 V DC (IEC 60950-1). It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Screen size12.1 inch
-
Resolution1024 x 768 XGA
-
Supply voltage24 V DC (IEC 60950-1)
-
Cutout dimensions301.5 x 227.5 mm
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 60950-1) |
| Power consumption |
44.5 W / 10 W |
| I/O and communication |
| Resolution |
1024 x 768 XGA |
| Screen size |
12.1 inch |
| Mechanical |
| Dimensions (H x W x D) |
315 x 241 x 67 mm |
| Weight |
3.2 kg |
| Mounting |
Panel mount (IEC 60529) |
| Enclosure rating |
IP65 (IEC 60529) front |
| Cutout dimensions |
301.5 x 227.5 mm |
| Backlight life |
50000 hours |
| Touch type |
Resistive film (analog) |
| Environment and compliance |
| Operating temperature |
0...+50 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Pro-face SP5000 smart portal HMI specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Pro-face SP5000 smart portal HMI variants |
| Catalog number |
Cutout dimensions |
Screen size |
Supply voltage |
|
PFXSP5600TAD (this page) |
301.5 x 227.5 mm |
12.1 inch |
24 V DC (IEC 60950-1) |
| PFXSP5600TPDRB4TY2 |
301.5 x 227.5 mm |
12.1 inch |
24 V DC (IEC 60950-1) |
| PFXSP5660TPD |
301.5 x 227.5 mm |
12.1 inch |
24 V DC (IEC 60950-1) |
| PFXSP5690WAD |
295 x 217 mm |
12.1 inch wide, outdoor |
24 V DC (IEC 60950-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The PFXSP5600TAD is the device-level element in a Pro-face HMI panel installation. It receives the field signals and control supply listed above — 24 V DC (IEC 60950-1) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Panel mount (IEC 60529) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial PFXSP5600TAD
Industrial PFXSP5600TAD — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number PFXSP5600TAD; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Power consumption: 44.5 W / 10 W — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP65 (IEC 60529) front — Match it to the existing panel and upstream protection.
- Dimensions (H x W x D): 315 x 241 x 67 mm — Record it with the other nameplate data when sourcing a replacement.
- Backlight life: 50000 hours — Confirm the revision of the installed unit before a like-for-like replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about PFXSP5600TAD
Q.Which value is published under backlight life for catalog number PFXSP5600TAD?
For PFXSP5600TAD, backlight life is given as 50000 hours. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering PFXSP5600TAD, which cutout dimensions entry should be checked?
The cutout dimensions entry quoted above is 301.5 x 227.5 mm. Confirm this figure against the unit currently in the panel.
Q.Where can I find the power consumption data for PFXSP5600TAD?
It is listed in the specification table for Industrial PFXSP5600TAD as 44.5 W / 10 W. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the PFXSP5600TAD replace the unit currently installed in my panel?
Compare catalog number PFXSP5600TAD and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for PFXSP5600TAD?
Send the full catalog number PFXSP5600TAD, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Industrial PFXSP5600TAD.