Pilz · Safety Relay
774585 is a Pilz industrial component with Supply voltage 24 V; Enclosure rating IP20 (IEC 60529); Operating temperature -25...+60 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature-25...+60 °C (IEC 60068-2-1)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated insulation voltage Ui |
690 V (IEC 60947-4-1) |
| Rated impulse withstand Uimp |
6 kV (IEC 60947-4-1) |
| Supply voltage |
24 V |
| Power consumption |
2.5 W |
| Rated torque |
0.60 Nm |
| Mechanical |
| Weight |
185 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Storage temperature |
-40 - 85 °C |
| Certifications |
CE, cULus, TÜV |
Values follow the Pilz Safety Relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Pilz Safety Relay variants |
| Catalog number |
Mounting |
|
774585 (this page) |
35 mm DIN rail (IEC 60715) |
| 774500 |
DIN rail / panel |
| 774540 |
DIN rail / panel |
| 774542 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 774585 is the device-level element in a Pilz industrial component installation. It receives the field signals and control supply listed above — 24 V — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Pilz 774585
Pilz 774585 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 774585; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Rated impulse withstand Uimp: 6 kV (IEC 60947-4-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Supply voltage: 24 V — Use it as the reference when cross-checking a current-production equivalent.
- Weight: 185 g — Verify it in the project documentation before confirming the order.
- Power consumption: 2.5 W — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 774585
Q.For 774585, what does the specification table state about operating temperature?
The specification table lists operating temperature = -25...+60 °C (IEC 60068-2-1) for Pilz 774585. Confirm this figure against the unit currently in the panel.
Q.Which value is published under certifications for catalog number 774585?
For 774585, certifications is given as CE, cULus, TÜV. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 774585, which storage temperature entry should be checked?
The storage temperature entry quoted above is -40 - 85 °C. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 774585 before ordering?
Match the catalog number 774585 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 774585 replace the unit currently installed in my panel?
Compare catalog number 774585 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.