Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Pilz · Safety Relay
751103 is a Pilz industrial component with Supply voltage DC; Enclosure rating IP20 (IEC 60529); Operating temperature -25...+60 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated insulation voltage Ui | 690 V (IEC 60947-4-1) |
|---|---|
| Rated impulse withstand Uimp | 6 kV (IEC 60947-4-1) |
| Supply voltage | DC |
| Power consumption | 2.5 W |
| Rated torque | 0.50 Nm No. 750103 |
| Mechanical | |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Terminal wire size | 24.0 V DC, 20 mA |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -25...+60 °C (IEC 60068-2-1) |
| Storage temperature | -40 - 85 °C |
| Certifications | CE, cULus, TÜV |
Values follow the Pilz Safety Relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Pilz Safety Relay variants | |||
| Catalog number | Mounting | ||
|---|---|---|---|
| 751103 (this page) | 35 mm DIN rail (IEC 60715) | ||
| 751102 | DIN rail / panel | ||
| 751104 | 35 mm DIN rail (IEC 60715) | ||
| 751105 | 35 mm DIN rail (IEC 60715) | ||
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 751103 is the device-level element in a Pilz industrial component installation. It receives the field signals and control supply listed above — DC — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Pilz 751103 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 751103; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
Available from stock with datasheet, certificates and a quotation on request.
Q.For 751103, what does the specification table state about mounting?
The specification table lists mounting = 35 mm DIN rail (IEC 60715) for Pilz 751103. Confirm this figure against the unit currently in the panel.
Q.Which value is published under terminal wire size for catalog number 751103?
For 751103, terminal wire size is given as 24.0 V DC, 20 mA. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 751103, which rated impulse withstand Uimp entry should be checked?
The rated impulse withstand Uimp entry quoted above is 6 kV (IEC 60947-4-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 751103?
Send the full catalog number 751103, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Pilz 751103.
Q.How do I confirm compatibility of 751103 before ordering?
Match the catalog number 751103 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
