Phoenix Contact · Connection Cable
5606125 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Frequency |
400 MHz ... 5.8 GHz |
| Mechanical |
| Weight |
712 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
Mounting |
|
5606125 (this page) |
up to 4 A |
DIN rail / panel |
| 5606124 |
up to 4 A |
DIN rail / panel |
| 5604027 |
up to 4 A |
DIN rail / panel |
| 5604602 |
up to 4 A |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 5606125 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 5606125
Phoenix Contact 5606125 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 5606125; verify the catalog number against your bill of materials before requesting a quotation.
- Frequency: 400 MHz ... 5.8 GHz — Verify it in the project documentation before confirming the order.
- Weight: 712 g — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Mounting: DIN rail / panel — Record it with the other nameplate data when sourcing a replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 5606125
Q.For 5606125, what does the specification table state about weight?
The specification table lists weight = 712 g for Phoenix Contact 5606125. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under frequency for catalog number 5606125?
For 5606125, frequency is given as 400 MHz ... 5.8 GHz. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 5606125, which rated current Ie entry should be checked?
The rated current Ie entry quoted above is up to 4 A. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 5606125?
Send the full catalog number 5606125, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 5606125.
Q.Can the 5606125 replace the unit currently installed in my panel?
Compare catalog number 5606125 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.