Phoenix Contact · Connection Cable
5606124 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Frequency |
400 MHz ... 5.8 GHz |
| Mechanical |
| Weight |
220 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
Mounting |
|
5606124 (this page) |
up to 4 A |
DIN rail / panel |
| 5606125 |
up to 4 A |
DIN rail / panel |
| 5604027 |
up to 4 A |
DIN rail / panel |
| 5604602 |
up to 4 A |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 5606124 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 5606124
Phoenix Contact 5606124 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 5606124; record the nameplate data of the unit being replaced before selecting an equivalent.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Frequency: 400 MHz ... 5.8 GHz — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: DIN rail / panel — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 5606124
Q.Which value is published under rated current Ie for catalog number 5606124?
For 5606124, rated current Ie is given as up to 4 A. Confirm this figure against the unit currently in the panel.
Q.Before ordering 5606124, which mounting entry should be checked?
The mounting entry quoted above is DIN rail / panel. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the enclosure rating data for 5606124?
It is listed in the specification table for Phoenix Contact 5606124 as IP67 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 5606124 before ordering?
Match the catalog number 5606124 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 5606124 replace the unit currently installed in my panel?
Compare catalog number 5606124 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.