Phoenix Contact · Terminal Block
3004362 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Tripping characteristic 8 mm; Rated operational voltage 800 V (IEC 60947-7-1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Tripping characteristic8 mm
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Tripping characteristic |
8 mm |
| Frequency |
f 1 = 5 Hz to f 2 = 250 Hz |
| Rated torque |
0.6 ... 0.8 Nm |
| Rated speed |
10 (+/- 2) rpm |
| Mechanical |
| Weight |
0.2 mm² / 0.2 kg |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 6 mm² |
| Environment and compliance |
| Operating temperature |
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) |
| Certifications |
CE, UL, cULus |
| Humidity |
20 % ... 90 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Tripping characteristic |
Rated operational voltage |
|
3004362 (this page) |
8 mm |
800 V (IEC 60947-7-1) |
| 3004524 |
10 mm |
800 V (IEC 60947-7-1) |
| 3005073 |
10 mm |
800 V (IEC 60947-7-1) |
| 3005109 |
11 mm |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 3004362 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 3004362
Phoenix Contact 3004362 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 3004362; record the nameplate data of the unit being replaced before selecting an equivalent.
- Rated speed: 10 (+/- 2) rpm — Use it as the reference when cross-checking a current-production equivalent.
- Weight: 0.2 mm² / 0.2 kg — Verify it in the project documentation before confirming the order.
- Rated torque: 0.6 ... 0.8 Nm — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 3004362
Q.For 3004362, what does the specification table state about rated torque?
The specification table lists rated torque = 0.6 ... 0.8 Nm for Phoenix Contact 3004362. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under rated current Ie for catalog number 3004362?
For 3004362, rated current Ie is given as up to 41 A (IEC 60947-7-1). Confirm this figure against the unit currently in the panel.
Q.Before ordering 3004362, which humidity entry should be checked?
The humidity entry quoted above is 20 % ... 90 %. Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 3004362 before ordering?
Match the catalog number 3004362 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 3004362 replace the unit currently installed in my panel?
Compare catalog number 3004362 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.