Phoenix Contact · Terminal Block
3004524 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Tripping characteristic 10 mm; Rated operational voltage 800 V (IEC 60947-7-1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Tripping characteristic10 mm
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Tripping characteristic |
10 mm |
| Rated torque |
1.5 ... 1.8 Nm |
| Mechanical |
| Weight |
13.4 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 10 mm² |
| Environment and compliance |
| Operating temperature |
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) |
| Certifications |
CE, UL, cULus |
| Humidity |
20 % ... 90 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Tripping characteristic |
Rated operational voltage |
|
3004524 (this page) |
10 mm |
800 V (IEC 60947-7-1) |
| 3004362 |
8 mm |
800 V (IEC 60947-7-1) |
| 3005073 |
10 mm |
800 V (IEC 60947-7-1) |
| 3005109 |
11 mm |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 3004524 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 3004524
Phoenix Contact 3004524 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 3004524; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Tripping characteristic: 10 mm — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated operational voltage: 800 V (IEC 60947-7-1) — Use it as the reference when cross-checking a current-production equivalent.
- Rated torque: 1.5 ... 1.8 Nm — Verify it in the project documentation before confirming the order.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 3004524
Q.Which value is published under operating temperature for catalog number 3004524?
For 3004524, operating temperature is given as -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C). Confirm this figure against the unit currently in the panel.
Q.Before ordering 3004524, which mounting entry should be checked?
The mounting entry quoted above is 35 mm DIN rail (IEC 60715). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the terminal wire size data for 3004524?
It is listed in the specification table for Phoenix Contact 3004524 as 0.2 mm² ... 10 mm². Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 3004524?
Send the full catalog number 3004524, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 3004524.
Q.Can the 3004524 replace the unit currently installed in my panel?
Compare catalog number 3004524 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.