Phoenix Contact · Safety Relay
2981237 is a Phoenix Contact industrial component with Supply voltage 24 V DC -15 % / +10 %; Enclosure rating IP20 (IEC 60529); Operating temperature -25...+60 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC -15 % / +10 %
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature-25...+60 °C (IEC 60068-2-1)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated insulation voltage Ui |
690 V (IEC 60947-4-1) |
| Rated impulse withstand Uimp |
6 kV (IEC 60947-4-1) |
| Tripping characteristic |
8 mm |
| Supply voltage |
24 V DC -15 % / +10 % |
| Power consumption |
typ. 3.6 W |
| Frequency |
0.5 Hz |
| I/O and communication |
| Safety integrity SIL/PL |
3 (for delayed contacts SIL 2) |
| Mechanical |
| Weight |
412.2 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
approx. 11 Ω (Input and start circuits at U S ) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
75 % (on average, 85% infrequently, non-condensing) |
| Degree of protection |
IP54 |
Values follow the Phoenix Contact Safety Relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Safety Relay variants |
| Catalog number |
Mounting |
|
2981237 (this page) |
35 mm DIN rail (IEC 60715) |
| 2981266 |
35 mm DIN rail (IEC 60715) |
| 2981017 |
35 mm DIN rail (IEC 60715) |
| 2981020 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2981237 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 24 V DC -15 % / +10 % — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2981237
Phoenix Contact 2981237 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2981237; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Rated insulation voltage Ui: 690 V (IEC 60947-4-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Supply voltage: 24 V DC -15 % / +10 % — Use it as the reference when cross-checking a current-production equivalent.
- Power consumption: typ. 3.6 W — Verify it in the project documentation before confirming the order.
- Humidity: 75 % (on average, 85% infrequently, non-condensing) — Check this value against the nameplate of the installed unit before ordering.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2981237
Q.Where can I find the humidity data for 2981237?
It is listed in the specification table for Phoenix Contact 2981237 as 75 % (on average, 85% infrequently, non-condensing). Compare it with the nameplate of the installed unit before ordering.
Q.For 2981237, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 2981237. Confirm this figure against the unit currently in the panel.
Q.Which value is published under rated insulation voltage Ui for catalog number 2981237?
For 2981237, rated insulation voltage Ui is given as 690 V (IEC 60947-4-1). Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 2981237 replace the unit currently installed in my panel?
Compare catalog number 2981237 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 2981237?
Send the full catalog number 2981237, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2981237.