Phoenix Contact · Safety relays
2981017 – PSR-SPP- 24DC/ESP4/2X1/1X2 · Safety relays
The Phoenix Contact 2981017 (PSR-SPP- 24DC/ESP4/2X1/1X2) is a Safety relays in the Phoenix Contact range. The specification below is transcribed from the official Phoenix Contact product page for this order number, which publishes the technical data in 13 sections: Notes, Product properties, Electrical properties, Input data, Output data, Connection data and further sections.
Nominal voltageGreen LED
Degree of protectionIP20
Ambient temperature-20 °C ... 55 °C (observe derating)
Dimensions22.5 mm
ConnectionPush-in connection
MaterialPA
How it works
Phoenix Contact keeps the values in the groups shown below, in the order the manufacturer publishes them: Notes, Product properties, Electrical properties, Input data, Output data, Connection data, Signaling, Dimensions, Material specifications, Characteristics, Environmental and real-life conditions, Approvals, Mounting. The values are carried over unchanged from the official product page; nothing is added beyond what the manufacturer states for this order number.
Specifications
Notes
Note on application
Note on applicationOnly for industrial use
Product properties
Product typeSafety relays
Product familyPSRclassic
ApplicationEmergency stop
ValueProcess technology
ValueSafety door
Control1-channel
Mechanical service lifeapprox. 10 7 cycles
Relay typeElectromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Insulation characteristics
Overvoltage categoryIII
Degree of pollution2
Times
Typical response timetyp. 60 ms (For U s manual, monitored start)
Value60 ms (For U s autostart)
Typ. starting time with U s60 ms (At Us/on demand via A1)
Typical release timetyp. 20 ms (At Us/on demand via A1)
Restart time< 1 s (Boot time)
Recovery time≥ 1 s (following demand of the safety function)
Start pulse length≥ 500 ms (manual start)
Electrical properties
Maximum power dissipation for nominal condition16.12 W (At U S = 26.4 V, I L ² = 72 A², P Total max = 1.72 W + 14.4 W)
Nominal operating mode100% operating factor
Rated insulation voltage250 V
Rated surge voltage/insulationSee data sheet, section “Insulation coordination”.
Input data
Digital: Logic (A1)
Description of the inputsafety-related
Number of inputs1
Input voltage range "1" signal20.4 V ... 26.4 V
Inrush currentmax. 1 A (typ. with U S , Δt = < 10 ms)
Filter timemax. 3 ms (Test pulse width of low test pulses)
Valuemin. 200 ms (Test pulse rate for low test pulse)
ValueNo brightness test pulses / high test pulses permitted.
Max. permissible overall conductor resistance50 Ω
Protective circuitSuppressor diode
Current consumption65 mA (typ. with U S )
Digital: Start circuit (Y2)
Description of the inputnon-safety-related
Number of inputs1
Input voltage range "1" signal20.4 V ... 26.4 V
Inrush current< 14 mA (typ. with U S at Y2, Δt - 10 ms)
Filter timeNo test pulses permitted
Max. permissible overall conductor resistance50 Ω
Protective circuitSuppressor diode
Current consumption0 mA (typ. with U S at Y2)
Output data
Relay: Enabling current paths (13/14, 23/24)
Output description2 N/O contacts each in series, safety-related, floating
Number of outputs2
Contact switching type2 enabling current paths
Contact materialAgSnO 2
Switching voltagemin. 10 V
Valuemax. 250 V AC/DC
Switching powermin. 100 mW
Inrush currentmin. 10 mA
Valuemax. 6 A
Switching capacity5 A (AC15)
Value5 A (DC13)
Limiting continuous current6 A (Observe derating and load limit curve)
Sq. Total current72 A 2 (observe derating)
Switching frequencymax. 0.5 Hz
Mechanical service life10 7 cycles
Output fuse10 A gL/gG
Value4 A gL/gG (for low-demand applications)
Relay: Signaling current path (31/32)
Output description2 N/C contacts parallel, non-safety-related, floating
Number of outputs1
Contact switching type1 signaling current path
Contact materialAgSnO 2
Switching voltagemin. 10 V AC/DC
Valuemax. 250 V AC/DC
Switching powermin. 100 mW
Inrush currentmin. 10 mA
Valuemax. 6 A
Switching capacity1.5 A (AC15)
Value2 A (DC13)
Limiting continuous current6 A
Sq. Total current36 A 2 (observe derating)
Switching frequencymax. 0.5 Hz
Mechanical service life10 7 cycles
Output fuse6 A gL/gG
Connection data
Connection technology
pluggableyes
Conductor connection
Connection methodPush-in connection
Conductor cross-section rigid0.2 mm² ... 1.5 mm²
Conductor cross-section flexible0.2 mm² ... 1.5 mm²
Conductor cross-section, flexible, with ferrule, with plastic sleeve0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section, flexible, with ferrule, without plastic sleeve0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG24 ... 16
Stripping length8 mm
Signaling
Status displayLED (green)
Operating voltage displayGreen LED
Dimensions
Width22.5 mm
Height112 mm
Depth114.5 mm
Material specifications
Color (Housing)yellow (RAL 1018)
Housing materialPA
Characteristics
Safety data
Stop category (EN 60204-1)0
Safety data: EN ISO 13849
Performance level (PL)e
Safety data: IEC 61508 - High demand
Safety Integrity Level (SIL)3
Safety data: IEC 61508 - Low demand
Safety Integrity Level (SIL)3
Safety data: EN IEC 62061
Safety Integrity Level (SIL)3
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Min. degree of protection of inst. locationIP54
Ambient temperature (operation)-20 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)-40 °C ... 70 °C
Maximum altitude≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)75 % (on average, 85% infrequently, non-condensing)
Shock15g
Vibration (operation)10 Hz ... 150 Hz, 2g
Approvals
CE
IdentificationCE-compliant
Mounting
Mounting typeDIN rail mounting
Mounting positionOn horizontal and vertical DIN rail
Order number
2981017 — https://www.phoenixcontact.com/en-us/products/safety-relays-psr-spp-24dcesp42x11x2-2981017
Official source
Phoenix Contact official product page, technical data section (EN-US); order number 2981017.
FAQ
What degree of protection does the 2981017 have?
It is rated IP20, as stated in the official technical data.
What ambient temperature is permitted?
Phoenix Contact specifies an ambient temperature of -20 °C ... 55 °C (observe derating).
What are the dimensions?
The technical data gives 22.5 mm.
How is the 2981017 connected?
Phoenix Contact specifies the connection as Push-in connection.
What material is the housing made of?
The technical data lists PA.
Shipping & support. Stock is held in Shanghai and dispatched worldwide with the manufacturer's documentation. Contact us for the current lead time, price and freight before ordering.