Phoenix Contact · Connection Cable
2926357 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Tripping characteristic |
150 mm |
| Rated torque |
0.2 Nm |
| I/O and communication |
| Flame detection |
IEC 60332-1-2 (raw cable) |
| Mechanical |
| Weight |
1,602.3 g |
| Terminal wire size |
Assembled shielded round cable |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Degree of protection |
≥ IP54 (Installation location) |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
2926357 (this page) |
up to 4 A |
| 2926302 |
up to 4 A |
| 2926360 |
up to 4 A |
| 2926386 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2926357 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2926357
Phoenix Contact 2926357 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2926357; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Degree of protection: ≥ IP54 (Installation location) — Record it with the other nameplate data when sourcing a replacement.
- Flame detection: IEC 60332-1-2 (raw cable) — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated current Ie: up to 4 A — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 2926357
Q.Where can I find the weight data for 2926357?
It is listed in the specification table for Phoenix Contact 2926357 as 1,602.3 g. Confirm this figure against the unit currently in the panel.
Q.For 2926357, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP67 (IEC 60529) for Phoenix Contact 2926357. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under degree of protection for catalog number 2926357?
For 2926357, degree of protection is given as ≥ IP54 (Installation location). Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 2926357 replace the unit currently installed in my panel?
Compare catalog number 2926357 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 2926357?
Send the full catalog number 2926357, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2926357.