Phoenix Contact 2926386 CABLE-D- 9SUB/M/OE/0,25/S/1,5M - Cable

SKU: 2926386
Regular price $72.92
In stock (63 units)
Condition
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Connection Cable

2926386 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 4 A
  • Enclosure ratingIP67 (IEC 60529)
  • Operating temperature-25...+80 °C (IEC 60068-2-1)
  • CertificationsCE, UL, cULus

Specifications

Electrical
Rated current Ie up to 4 A
Tripping characteristic  150 mm
Rated torque 0.2 Nm
I/O and communication
Flame detection IEC 60332-1-2 (raw cable)
Mechanical
Weight 135.34 g
Terminal wire size Assembled shielded round cable
Enclosure rating IP67 (IEC 60529)
Environment and compliance
Operating temperature -25...+80 °C (IEC 60068-2-1)
Certifications CE, UL, cULus
Degree of protection ≥ IP54 (Installation location)

Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Connection Cable variants
Catalog number Rated current Ie
2926386 (this page) up to 4 A
2926302 up to 4 A
2926357 up to 4 A
2926360 up to 4 A

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 2926386 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 2926386

Phoenix Contact 2926386 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2926386; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.

  • Operating temperature: -25...+80 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
  • Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
  • Weight: 135.34 g — Check this value against the nameplate of the installed unit before ordering.
  • Terminal wire size: Assembled shielded round cable — Match it to the existing panel and upstream protection.

Available from stock with datasheet, certificates and a quotation on request.

Common questions about 2926386

Q.Where can I find the weight data for 2926386?

It is listed in the specification table for Phoenix Contact 2926386 as 135.34 g. Compare it with the nameplate of the installed unit before ordering.

Q.For 2926386, what does the specification table state about rated current Ie?

The specification table lists rated current Ie = up to 4 A for Phoenix Contact 2926386. Confirm this figure against the unit currently in the panel.

Q.Which value is published under tripping characteristic for catalog number 2926386?

For 2926386, tripping characteristic is given as  150 mm. Use the value as the reference when sourcing a current-production equivalent.

Q.Can the 2926386 replace the unit currently installed in my panel?

Compare catalog number 2926386 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Q.What should I include in an enquiry for 2926386?

Send the full catalog number 2926386, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2926386.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!