Phoenix Contact · industrial component
2904890 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated insulation voltage Ui |
1000 V AC (rms CAT III) |
| Coil voltage |
Elastollan |
| Output voltage |
V OUT = M * dI/dt |
| Frequency |
40 Hz ... 20000 Hz |
| Mechanical |
| Weight |
159 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
2x 0.22 mm (Signal (tinned)) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact industrial component specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact industrial component variants |
| Catalog number |
Mounting |
|
2904890 (this page) |
DIN rail / panel |
| 2900582 |
35 mm DIN rail (IEC 60715) |
| 2903916 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2904890 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2904890
Phoenix Contact 2904890 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2904890; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Frequency: 40 Hz ... 20000 Hz — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Humidity: 5 % ... 95 % (non-condensing) — Use it as the reference when cross-checking a current-production equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 2904890
Q.Before ordering 2904890, which humidity entry should be checked?
The humidity entry quoted above is 5 % ... 95 % (non-condensing). Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the coil voltage data for 2904890?
It is listed in the specification table for Phoenix Contact 2904890 as Elastollan. Confirm this figure against the unit currently in the panel.
Q.For 2904890, what does the specification table state about weight?
The specification table lists weight = 159 g for Phoenix Contact 2904890. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 2904890 replace the unit currently installed in my panel?
Compare catalog number 2904890 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 2904890?
Send the full catalog number 2904890, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2904890.