Phoenix Contact · Temperature Transmitter
2902022 is a Phoenix Contact industrial component with Supply voltage 11...30 V DC (loop powered); Enclosure rating IP66 / IP67 (IEC 60529); Operating temperature -40...+85 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage11...30 V DC (loop powered)
-
Enclosure ratingIP66 / IP67 (IEC 60529)
-
Operating temperature-40...+85 °C (IEC 60068-2-1)
-
MountingDIN rail mounting
Specifications
| Electrical |
| Rated insulation voltage Ui |
300 V rms |
| Tripping characteristic |
10 mm |
| Supply voltage |
11...30 V DC (loop powered) |
| Power consumption |
≤ 800 mW (9.6 V DC) |
| Frequency |
30 Hz |
| Rated torque |
0.5 Nm ... 0.6 Nm |
| I/O and communication |
| Response time |
10 ms |
| Mechanical |
| Weight |
115.2 g |
| Mounting |
DIN rail mounting |
| Terminal wire size |
0.2 mm² ... 1.5 mm² (with ferrule) |
| Enclosure rating |
IP66 / IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-40...+85 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Temperature Transmitter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Temperature Transmitter variants |
| Catalog number |
Mounting |
|
2902022 (this page) |
DIN rail mounting |
| 2902021 |
DIN rail mounting |
| 2902026 |
DIN rail mounting |
| 2902028 |
DIN rail mounting |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2902022 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 11...30 V DC (loop powered) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail mounting support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2902022
Phoenix Contact 2902022 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2902022; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Response time: 10 ms — Verify it in the project documentation before confirming the order.
- Frequency: 30 Hz — Check this value against the nameplate of the installed unit before ordering.
- Power consumption: ≤ 800 mW (9.6 V DC) — Match it to the existing panel and upstream protection.
- Operating temperature: -40...+85 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 2902022
Q.For 2902022, what does the specification table state about terminal wire size?
The specification table lists terminal wire size = 0.2 mm² ... 1.5 mm² (with ferrule) for Phoenix Contact 2902022. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under operating temperature for catalog number 2902022?
For 2902022, operating temperature is given as -40...+85 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 2902022, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP66 / IP67 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 2902022?
Send the full catalog number 2902022, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2902022.
Q.Can the 2902022 replace the unit currently installed in my panel?
Compare catalog number 2902022 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.