Phoenix Contact · Temperature Transmitter
2902021 is a Phoenix Contact industrial component with Supply voltage 11...30 V DC (loop powered); Enclosure rating IP66 / IP67 (IEC 60529); Operating temperature -40...+85 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage11...30 V DC (loop powered)
-
Enclosure ratingIP66 / IP67 (IEC 60529)
-
Operating temperature-40...+85 °C (IEC 60068-2-1)
-
MountingDIN rail mounting
Specifications
| Electrical |
| Rated insulation voltage Ui |
300 V rms |
| Tripping characteristic |
10 mm |
| Supply voltage |
11...30 V DC (loop powered) |
| Power consumption |
≤ 800 mW (at I OUT = 20 mA, 9.6 V DC, 600 Ω load) |
| Frequency |
30 Hz (via DIP switch) |
| Mechanical |
| Weight |
61.7 g |
| Mounting |
DIN rail mounting |
| Terminal wire size |
0.2 mm² ... 2.5 mm² (with ferrule) |
| Enclosure rating |
IP66 / IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-40...+85 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Temperature Transmitter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Temperature Transmitter variants |
| Catalog number |
Mounting |
|
2902021 (this page) |
DIN rail mounting |
| 2902022 |
DIN rail mounting |
| 2902026 |
DIN rail mounting |
| 2902028 |
DIN rail mounting |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2902021 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 11...30 V DC (loop powered) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail mounting support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2902021
Phoenix Contact 2902021 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2902021; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Frequency: 30 Hz (via DIP switch) — Match it to the existing panel and upstream protection.
- Rated insulation voltage Ui: 300 V rms — Record it with the other nameplate data when sourcing a replacement.
- Power consumption: ≤ 800 mW (at I OUT = 20 mA, 9.6 V DC, 600 Ω load) — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: -40...+85 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 2902021
Q.For 2902021, what does the specification table state about power consumption?
The specification table lists power consumption = ≤ 800 mW (at I OUT = 20 mA, 9.6 V DC, 600 Ω load) for Phoenix Contact 2902021. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under frequency for catalog number 2902021?
For 2902021, frequency is given as 30 Hz (via DIP switch). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 2902021, which supply voltage entry should be checked?
The supply voltage entry quoted above is 11...30 V DC (loop powered). Confirm this figure against the unit currently in the panel.
Q.Can the 2902021 replace the unit currently installed in my panel?
Compare catalog number 2902021 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 2902021 before ordering?
Match the catalog number 2902021 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.