Phoenix Contact · Contactron motor starter
2900576 is a Phoenix Contact circuit breaker with Tripping characteristic B / C / D (IEC 60947-2); Number of poles 1 / 2 / 3 / 4 (IEC 60947-2); Breaking capacity Icu/Ics 6 kA / 10 kA (IEC 60947-2). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Tripping characteristicB / C / D (IEC 60947-2)
-
Number of poles1 / 2 / 3 / 4 (IEC 60947-2)
-
Breaking capacity Icu/Ics6 kA / 10 kA (IEC 60947-2)
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated insulation voltage Ui |
440 V (IEC 60947-2) |
| Rated impulse withstand Uimp |
4 kV (IEC 60947-2) |
| Breaking capacity Icu/Ics |
6 kA / 10 kA (IEC 60947-2) |
| Tripping characteristic |
B / C / D (IEC 60947-2) |
| Number of poles |
1 / 2 / 3 / 4 (IEC 60947-2) |
| Frequency |
≤ 2 Hz (Load-dependent) |
| Rated torque |
0.5 Nm ... 0.6 Nm |
| Mechanical |
| Weight |
253 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Contactron motor starter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Contactron motor starter variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
|
2900576 (this page) |
B / C / D (IEC 60947-2) |
6 kA / 10 kA (IEC 60947-2) |
| 2900573 |
B / C / D (IEC 60947-2) |
6 kA / 10 kA (IEC 60947-2) |
| 2900574 |
B / C / D (IEC 60947-2) |
6 kA / 10 kA (IEC 60947-2) |
| 2900530 |
B / C / D (IEC 60947-2) |
6 kA / 10 kA (IEC 60947-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2900576 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2900576
Phoenix Contact 2900576 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2900576; verify the catalog number against your bill of materials before requesting a quotation.
- Enclosure rating: IP20 (IEC 60529) — Verify it in the project documentation before confirming the order.
- Rated insulation voltage Ui: 440 V (IEC 60947-2) — Check this value against the nameplate of the installed unit before ordering.
- Breaking capacity Icu/Ics: 6 kA / 10 kA (IEC 60947-2) — Match it to the existing panel and upstream protection.
- Rated impulse withstand Uimp: 4 kV (IEC 60947-2) — Record it with the other nameplate data when sourcing a replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2900576
Q.For 2900576, what does the specification table state about rated insulation voltage Ui?
The specification table lists rated insulation voltage Ui = 440 V (IEC 60947-2) for Phoenix Contact 2900576. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under certifications for catalog number 2900576?
For 2900576, certifications is given as CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.Before ordering 2900576, which rated torque entry should be checked?
The rated torque entry quoted above is 0.5 Nm ... 0.6 Nm. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 2900576?
Send the full catalog number 2900576, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2900576.
Q.Can the 2900576 replace the unit currently installed in my panel?
Compare catalog number 2900576 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.