Phoenix Contact · Temperature Transmitter
2865696 is a Phoenix Contact industrial component with Supply voltage 11...30 V DC (loop powered); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage11...30 V DC (loop powered)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated insulation voltage Ui |
300 V rms |
| Supply voltage |
11...30 V DC (loop powered) |
| I/O and communication |
| Protocols |
HART-transparent |
| Mechanical |
| Weight |
96.3 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Temperature Transmitter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Temperature Transmitter variants |
| Catalog number |
Mounting |
|
2865696 (this page) |
DIN rail / panel |
| 2865654 |
DIN rail mounting |
| 2865007 |
DIN rail mounting |
| 2865010 |
DIN rail mounting |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2865696 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 11...30 V DC (loop powered) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2865696
Phoenix Contact 2865696 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2865696; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Rated insulation voltage Ui: 300 V rms — Match it to the existing panel and upstream protection.
- Humidity: 10 % ... 95 % (non-condensing) — Record it with the other nameplate data when sourcing a replacement.
- Supply voltage: 11...30 V DC (loop powered) — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: DIN rail / panel — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2865696
Q.For 2865696, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Phoenix Contact 2865696. Confirm this figure against the unit currently in the panel.
Q.Which value is published under certifications for catalog number 2865696?
For 2865696, certifications is given as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 2865696, which supply voltage entry should be checked?
The supply voltage entry quoted above is 11...30 V DC (loop powered). Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 2865696 before ordering?
Match the catalog number 2865696 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 2865696?
Send the full catalog number 2865696, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2865696.