Phoenix Contact · Relay
2822451 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated insulation voltage Ui |
690 V (IEC 60947-4-1) |
| Rated impulse withstand Uimp |
6 kV (IEC 60947-4-1) |
| Input voltage range |
230 V AC/DC |
| I/O and communication |
| Response time |
6 ms (with DC) |
| Mechanical |
| Weight |
61.77 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Relay variants |
| Catalog number |
Mounting |
|
2822451 (this page) |
DIN rail / panel |
| 2822406 |
DIN rail / panel |
| 2822419 |
DIN rail / panel |
| 2822011 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2822451 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2822451
Phoenix Contact 2822451 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2822451; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Weight: 61.77 g — Record it with the other nameplate data when sourcing a replacement.
- Rated impulse withstand Uimp: 6 kV (IEC 60947-4-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
- Input voltage range: 230 V AC/DC — Verify it in the project documentation before confirming the order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 2822451
Q.For 2822451, what does the specification table state about rated impulse withstand Uimp?
The specification table lists rated impulse withstand Uimp = 6 kV (IEC 60947-4-1) for Phoenix Contact 2822451. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under operating temperature for catalog number 2822451?
For 2822451, operating temperature is given as 0...+55 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.
Q.Before ordering 2822451, which weight entry should be checked?
The weight entry quoted above is 61.77 g. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 2822451?
Send the full catalog number 2822451, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2822451.
Q.How do I confirm compatibility of 2822451 before ordering?
Match the catalog number 2822451 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.