Phoenix Contact · Remote I/O Module
2761444 is a Phoenix Contact industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Rated torque |
0.56 Nm ... 0.79 Nm |
| Mechanical |
| Weight |
292.27 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Remote I/O Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Remote I/O Module variants |
| Catalog number |
Mounting |
|
2761444 (this page) |
DIN rail / panel |
| 2761253 |
35 mm DIN rail (IEC 60715) |
| 2761266 |
35 mm DIN rail (IEC 60715) |
| 2761392 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2761444 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2761444
Phoenix Contact 2761444 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2761444; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Supply voltage: 24 V DC (IEC 61131-2) — Use it as the reference when cross-checking a current-production equivalent.
- Rated torque: 0.56 Nm ... 0.79 Nm — Verify it in the project documentation before confirming the order.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Weight: 292.27 g — Match it to the existing panel and upstream protection.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 2761444
Q.Before ordering 2761444, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the mounting data for 2761444?
It is listed in the specification table for Phoenix Contact 2761444 as DIN rail / panel. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 2761444, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Phoenix Contact 2761444. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 2761444?
Send the full catalog number 2761444, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2761444.
Q.How do I confirm compatibility of 2761444 before ordering?
Match the catalog number 2761444 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.