Phoenix Contact · Terminal Block
2702547 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Breaking capacity Icu/Ics Ethernet in RJ45 twisted pair. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Breaking capacity Icu/IcsEthernet in RJ45 twisted pair
-
Supply voltage2x 100 V AC ... 240 V AC (redundant)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Breaking capacity Icu/Ics |
Ethernet in RJ45 twisted pair |
| Supply voltage |
2x 100 V AC ... 240 V AC (redundant) |
| Power consumption |
max. 600 W |
| Rated speed |
10/100/1000 Mbps |
| Mechanical |
| Weight |
16 kg |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Environment and compliance |
| Operating temperature |
0 °C ... 45 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
20 % ... 90 % (non-condensing) |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Breaking capacity Icu/Ics |
Tripping characteristic |
Rated operational voltage |
|
2702547 (this page) |
Ethernet in RJ45 twisted pair |
— |
800 V (IEC 60947-7-1) |
| 2702544 |
— |
— |
800 V (IEC 60947-7-1) |
| 2702501 |
Failure of the internal I/O supply I/O error message sent to the bus coupler |
8 mm |
800 V (IEC 60947-7-1) |
| 2702503 |
Failure of the internal I/O supply I/O error message sent to the bus coupler |
8 mm |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2702547 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 2x 100 V AC ... 240 V AC (redundant) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2702547
Phoenix Contact 2702547 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2702547; verify the catalog number against your bill of materials before requesting a quotation.
- Weight: 16 kg — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated speed: 10/100/1000 Mbps — Use it as the reference when cross-checking a current-production equivalent.
- Mounting: 35 mm DIN rail (IEC 60715) — Verify it in the project documentation before confirming the order.
- Humidity: 20 % ... 90 % (non-condensing) — Check this value against the nameplate of the installed unit before ordering.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2702547
Q.Where can I find the rated current Ie data for 2702547?
It is listed in the specification table for Phoenix Contact 2702547 as up to 41 A (IEC 60947-7-1). Compare it with the nameplate of the installed unit before ordering.
Q.For 2702547, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 2702547. Confirm this figure against the unit currently in the panel.
Q.Which value is published under power consumption for catalog number 2702547?
For 2702547, power consumption is given as max. 600 W. Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 2702547 before ordering?
Match the catalog number 2702547 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2702547 replace the unit currently installed in my panel?
Compare catalog number 2702547 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.