Phoenix Contact · Terminal Block
2702501 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Tripping characteristic 8 mm; Rated operational voltage 800 V (IEC 60947-7-1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Tripping characteristic8 mm
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Breaking capacity Icu/IcsFailure of the internal I/O supply I/O error message sent to the bus coupler
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Breaking capacity Icu/Ics |
Failure of the internal I/O supply I/O error message sent to the bus coupler |
| Tripping characteristic |
8 mm |
| Supply voltage |
7.5 V DC (via voltage jumper) |
| Rated speed |
500 kbps |
| I/O and communication |
| Bus interface |
64 bit |
| Resolution |
24 bit |
| Mechanical |
| Weight |
83.2 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.08 mm² ... 1.5 mm² |
| Environment and compliance |
| Operating temperature |
0 °C ... 55 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
2702501 (this page) |
8 mm |
Failure of the internal I/O supply I/O error message sent to the bus coupler |
800 V (IEC 60947-7-1) |
| 2702503 |
8 mm |
Failure of the internal I/O supply I/O error message sent to the bus coupler |
800 V (IEC 60947-7-1) |
| 2702535 |
— |
— |
800 V (IEC 60947-7-1) |
| 2702538 |
10 mm |
Copper |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2702501 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 7.5 V DC (via voltage jumper) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2702501
Phoenix Contact 2702501 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2702501; verify the catalog number against your bill of materials before requesting a quotation.
- Operating temperature: 0 °C ... 55 °C — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Bus interface: 64 bit — Verify it in the project documentation before confirming the order.
- Rated current Ie: up to 41 A (IEC 60947-7-1) — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2702501
Q.Where can I find the rated current Ie data for 2702501?
It is listed in the specification table for Phoenix Contact 2702501 as up to 41 A (IEC 60947-7-1). Compare it with the nameplate of the installed unit before ordering.
Q.For 2702501, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 2702501. Confirm this figure against the unit currently in the panel.
Q.Which value is published under humidity for catalog number 2702501?
For 2702501, humidity is given as 10 % ... 95 % (non-condensing). Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 2702501?
Send the full catalog number 2702501, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2702501.
Q.How do I confirm compatibility of 2702501 before ordering?
Match the catalog number 2702501 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.